Children whose OLA required an EB technique because they were too small for the smallest available DLT or Univent® tube were eligible. Cases requiring a 2.5 mm ID ETT were excluded as passage of our paediatric fibrescope (external diameter 1.8 mm) would not be possible. Informed written ...
The residue was dissolved in CS2 and placed in an ESR tube, which was connected to a vacuum line. The solution was degassed by three freeze-pump thaw cycles under reduced pressure, and then sealed. Enrichment of HeN@C70. After sublimation of He@C70/C70 (3/7) through resistive heating in...
A hollow body (4) is placed inside an insertion tube (3) and then pressed into the ground with the tube, after which the tube is removed, leaving the hollow body in the ground, which can then be filled with a filler material, e.g. concrete.NICO GERHARD CORTLEVER...
The plates can be welded to the tube 21 as at 24. .It should be understood, of course, that any other suitable manner of securing the plates to the tube can be used. The slots project inwardly from the free end of the tube 21 for an appre- f ciable distance as shown in. ...
Wound laminated plastic pipe - by placing resin impregnated particles on fibre sheet, applying upper fibre sheet, andWound tube with an intermediate layer of a thermosetting resin contng. inorg. particles between inner and outer layers of fibre reinforced thermosetting resin is produced by (a) ...