mode lacp-static 命令功能 mode lacp-static命令用来配置Eth-Trunk的工作模式。 命令格式 mode lacp-static 参数说明 无 视图 Eth-Trunk接口视图 缺省级别 2:配置级 使用指南 应用场景 目前设备支持的Eth-Trunk工作模式分类如下: LACP模式 当组成Eth-Trunk的两台设备直连,并且都支持LACP协议时,可通过命令mode lacp...
51CTO博客已为您找到关于mode lacp-static的相关内容,包含IT学习相关文档代码介绍、相关教程视频课程,以及mode lacp-static问答内容。更多mode lacp-static相关解答可以来51CTO博客参与分享和学习,帮助广大IT技术人实现成长和进步。
要实现静态LACP链路聚合,如下哪个命令是eth-trunk接口下必须配置的命令? ()A.Lacp priority 100B.Mode lacp-staticC.Po
bond_ethdev_tx_burst_8023ad代码比较长不贴了,原理就是在业务正常调用rte_eth_tx_burst时,顺便把 lacp tx_ring 的数据发送到网卡。 问题所在 结合两个发包逻辑可以明确,dpvs 属于业务层,qconf 的缓存里有数据才发送,而 lcap 的数据是存储在 dpdk 底层的 tx_ring 中,当 bond 网卡刚被 dpvs up 起来时,业...
A.mode lacp-staticB.max active-linknumber link-numberC.lacp priority priorityD.least active-linknumber link-number相关知识点: 试题来源: 解析 B.max active-linknumber link-number;C.lacp priority priority;D.least active-linknumber link-number
To configure an Eth-Trunk in static LACP mode, you need the following data. No. Data 1 Number of the Eth-Trunk 2 Type and number of the member interfaces 3 Maximum number of active interfaces Configuring the Eth-Trunk to Work in Static LACP Mode Context Check whether an Eth-Trunk...
interface Eth-Trunk1mode lacp-static# interface Eth-Trunk2 # interface Eth-Trunk3 # Check whether Eth-Trunk member interfaces are bound to BFD sessions. The following command output shows that Eth-Trunk 2's member interface GigabitEthernet1/0/0 is bound to a BFD session but member interface...
百度试题 题目配置静态 LACP 模式聚合,以下那些命令是可选的? A.mode lacp-staticB.max active-linknumber link-numberC.lacp priority priorityD.least active-linknumber link-number相关知识点: 试题来源: 解析 BCD
The Eth-Trunks work in static LACP mode. 3. Symptom: 1. Remove the optical fiber from g2/0/7 on ME60-1. A member down alarm is generated on Eth-Trunk 17 is Down, indicating that 18/0 on OLT1 is Down.2. Remove the optical fiber from g2/0/7 on ME60-2. A member down ...