Well, the result of this would probably be a NaN (Not a Number), since dividing by zero is undefined. the 0._r8 means a real value of 0 with the real kind defined by the parameter constant r8, whatever that happens to be. The result of max(some_value,0._...
해결됨솔루션으로 이동 Hello there, ok, here we go, I have a dream, make a 3D engine 100% assembler intel only with CPU, I use rotation matrix only for now. it works of course, but it's slow when I put a lot of pixels. ...
해결됨: Recently I got my hands on a DG1 Xe (from ASUSTeK) and a DG1 Xe MAX (from GUNNIR) dGPU. According to this post (
해결됨 솔루션으로 이동 Hi, I am currently building the N6000 MAX10 BMC provided in this guide, when running the script as mentioned in the guide "./build.sh" the script throws errors. I am not able to clear this error and the file is not ...
I've recently also started encoding videos and temperature reaches 90° with fans at full speed for as long as the video is encoding - if this is considered safe behaviour, I think it should be no problem running the laptop at 65°. Or is it considered best practice to alway...
해결됨: I'm trying to simulate the Max10 ADC in QuestaSim 2021.3. The ADC Core ready signal (modular_adc_0_command_ready) never goes high. I suspect
해결됨 솔루션으로 이동 Hi all, I have a question about RAM frequency can be used with i9-7900x On intel ark site, i see RAM type DDR4-2666 Mhz. I'm lookin to by a good MB tu run and i think the Asus prime x299 Deluxe is a good cho...
the 0._r8 means a real value of 0 with the real kind defined by the parameter constant r8, whatever that happens to be. The result of max(some_value,0._r8) is either 0 or some_value, whichever is larger. That is then multiplied by variable j and divided by...
the 0._r8 means a real value of 0 with the real kind defined by the parameter constant r8, whatever that happens to be. The result of max(some_value,0._r8) is either 0 or some_value, whichever is larger. That is then multiplied by variable j and divided by...
the 0._r8 means a real value of 0 with the real kind defined by the parameter constant r8, whatever that happens to be. The result of max(some_value,0._r8) is either 0 or some_value, whichever is larger. That is then multiplied by variable j and divided by ze...