在软件开发和编译过程中,make 命令是一个常用的自动化构建工具。然而,有时你可能会遇到 make: *** No rule to make target 'install'. Stop. 这样的错误。这个错误意味着 make 命令没有找到名为 ‘install’ 的目标规则。 错误原因 这个错误通常是由以下几个原因引起的: Makefile 中没有定义 ‘install’ 目...
最近使用make编译引用静态库,结果出现标题所示完整错误类似为: make: *** No rule to make target /xxx/xxx/xxxx/xxxxx/xxx.cpp(or .h )', needed by xxx_xxx.o’. Stop. 原因分析: 进入xxx_xxx.o.d 所记录的xxx.cpp 路径与本机器不符。 这种情况有时候是因为工程所在的目录改变,该工程在其他机器上...
在编译内核时,无论使用哪种方式都提示:make ***No rule to make target "menuconfig".stop. 原因是没有在内核源码目录下进行。例如,要编译或升级的内核解压后的目录为/usr/src/linux-2.4.24,一定要进入到该目录后使用make menuconfig命令,这样就不会提示上面的错误了。
make: *** No rule to make target /xxx/xxx/xxxx/xxxxx/xxx.cpp(or .h )', neede d byxxx_xxx.o’. Stop. 原因分析: 进入xxx_xxx.o.d 所记录的xxx.cpp 路径与本机器不符。 这种情况有时候是因为工程所在的目录改变,该工程在其他机器上make(或在其他目录),xxx_xxx.o所在文件夹是上一次make的...
Beyondstudio编译导入模板出现make: *** No rule to make target irq_JN516x.o', needed byxxx_ZBP_Coordinator_JN5169.elf’. Stop. 解决办法 问题原因:整个工程的起始文件就是irq_JN516x.S这个汇编文件,所以出现上述错误表明一开始的编译就是找不到makefile规则的,证明是工程... ...
因为配置nginx环境执行./configure出现了错误,再执行make就会报:make: *** No rule to make target build', needed bydefault'. Stop.错误。 2、本人执行./configure出现的error: ./configure: error: the HTTP rewrite module requires the PCRE library.You can either disable the module by using--without-...
make: *** No rule to make target `.build/bin/configtxgen', needed by `configtxgen'. Stop. ➜ fabric git:(master) ✗ 后来,在其他机器上发现,存在.build文件的可以通过编译。 --->从对应版本的项目中复制fabric/.build过来,就可以编译了。<--- ➜...
执行make出现:make: *** No rule to make targetbuild', needed bydefault’. Stop. 1.安装nginx执行./configure…会在最后报以下几种错误,之后执行make就会报:make: *** No rule to make targetbuild', needed bydefault’. Stop.错误。 注:个人经历,错误1、2、3可能会逐个出现,所以出现那个就解决那个吧...
make[1]: *** No rule to make target ‘.depend.XXXX‘, needed by ‘.XX‘. Stop.解决 最近在移植uboot支持NANDFLASH时,遇到一个错误。烦了两天,终于找到了!具体报错如下。 make[1]:***No rule to make target'.depend.s3c2440_nand',needed by'.depend'.Stop.make[1]:Leaving directory'...
1make file 出错 No rule to make target 'g++',needed by 'main'.Stop这是我的makefileOBJS = main.o CATSvrMgr.o CJobSysEpoll.o CTcpEpollMgr.o CThreadBase.oCC = g++main : (CC) -g -o main $(OBJS)main.o : CATSvrMgr.hCATSvrMgr.o : CATSvrMgr.h CJobSysEpoll.hCJobSysEpoll.o : ...