However, before servicing the tires/wheels, it is always recommended to use a TPMS tool to trigger each of the vehicle’s sensors to make sure they are working properly. For example, a 2008 Dodge Charger requires the following auto relearn procedure: Inflate all tires Drive for 20 minutes ...
4. Relearn sensors after clearing codes 5. Switch the ignition off and on again, start the engine, use the tool to scan the TPMS system to ensure the codes have been cleared and the TPMS light is off 6. Drive your vehicle for 15 minutes to make sure the light does not display again...
TPMS In Vehicles Most vehicles manufactured have an in-vehicle relearn mode which enables the vehicle to relearn the TPMS ID's when the tool is used to activate the sensor. Not all vehicles may be placed into a re-learn mode (most Asian and European vehicles do not have this feature) and...
The Autel TS508 diagnostic TPMS service tool (check price) is alsovery easy to use and delivers accurate results.You will have two service modes to pick from quick mode and advanced mode.With this TPMS Toolunit, you will be able to perform tasks such as readingTPMS sensors,program sensors,...
Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor Repeat the process for the passenger side front tire, passenger side rear tire...
TPMS sensor. The malfunction light and the DIC message should go off at the next ignition cycle. The sensors are matched to the tire/wheel positions, using a TPMS relearn tool, in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver ...