My code crashed in setup when I call i2s init function after ble init function even though I run them separately successfully. Here is my i2s init function: Code: Select all static void i2s_init(void){ i2s_config_t i2s_config = { .mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE...
//蓝牙连接id uint16_t attr_handle,//句柄 uint16_t value_len, //发送的数据长度 uint8_t *value, //发送的数据内容 bool need_confirm//是否需要确认 ) esp_ble_gatts_send_indicate(spp_gatts_if, spp_conn_id, spp_handle_table[SPP_IDX_SPP_STATUS_VAL...
IRAM是内部RAM,当我使用wifi+ble+ASR组成的一个工程时,编译后出现Section .iram0.text will not fit in region iram0_0_seg的错误,原因是IRAM的内存空间仍然不够,这是因为任务堆栈等数据是不能存放在外部RAM中的,所以IRAM中的内存依然紧张。 原理就是关闭一些网络功能的优化来减少IRAM的使用: 按照这位老哥的说...
// Camera init esp_err_t err = esp_camera_init(&config); if (err != ESP_OK) { Serial.printf("Camera init failed with error 0x%x", err); return; } } void setup() { // Start Serial Monitor, wait until port is ready Serial.begin(115200); while (!Serial) ; // I2S Setup and...
esp_ble_gatts_cb_param_t 数据结构的指针 * @return true 存储成功 * @return false 存储失败 */static bool store_wr_buffer(esp_ble_gatts_cb_param_t *p_data){ // 分配存储通过SPP蓝牙服务接收到的数据节点的空间 temp_spp_recv_data_node_p1 = (spp_receive_data_node_t *)malloc(size...
();ret=esp_bt_controller_init(&bt_cfg);if(ret){ESP_LOGE(GATTC_TAG,"%s initialize controller failed, error code = %x\n",__func__,ret);return;}ret=esp_bt_controller_enable(ESP_BT_MODE_BLE);if(ret){ESP_LOGE(GATTC_TAG,"%s enable controller failed, error code = %x\n",__func_...
在ESP32的设计开发中,我们必然会需要使用到wifi或ble功能,今天就讲解下如何将WIFI功能纳入到ESP32中来。 初始化WiFi环境 首先,WiFi子系统的初始化需要由我们自己来自行,当我们写自己的程序时,需要通过调用 esp_wifi_init() 方法 来完成 。 推荐的方式如下: ...
if ((ret = esp_bt_controller_init(&bt_cfg)) != ESP_OK) { ESP_LOGI(TAG, "Bluetooth controller initialize failed: %s", esp_err_to_name(ret)); return; } if ((ret = esp_bt_controller_enable(ESP_BT_MODE_BLE)) != ESP_OK) { ...
在ESP32的设计开发中,我们必然会需要使用到wifi或ble功能,今天就讲解下如何将WIFI功能纳入到ESP32中来。 初始化WiFi环境 首先,WiFi子系统的初始化需要由我们自己来自行,当我们写自己的程序时,需要通过调用 esp_wifi_init() 方法 来完成 。 推荐的方式如下: ...
学会了添加 characteristic ,还得学会添加 service,本文来学习新增蓝牙服务。 前言 在上一篇文章,我们使用 ESP-IDF 的示例框架,很方便的就添加好了新的特征值(characteristic ),我们说过,就是开发 service 和 characteristic,所以我们还需要学会添加自己的 Service 。