Previous theoretical thermomechanical analyses point out the possible occurrence of induced interfacial stresses between the steel and the ceramic part. Both factors motivate the actual FCI development towards
5. It has good compatibility with paint and coatings 6.The product can be made of liquid by adding water, then apply the liquid on the surface of ceramic brick, you can get 1cm nanometer titanium film with the property of killing bacteria after heating in a high...
Spherical amorphous silica has been prepared according to the process in which a silica hydrosol is sprayed or the spray is further caused to impinge to a fluid, the process in which an organic silicic acid compound is hydrolyzed, the process in which a glass ceramic is molded into a spherica...
Isopipes (13) for making a glass or a glass-ceramic using a fusion process are provided. The isopipes are made from an alumina material which has a higher static fatigue than
fuel cladding chemical interactionsFCCIUranium mononitride (UN) and alumina forming austenitic (AFA) stainless steel are a potential fuel-cladding combination for the lead-cooled fast reactor (LFR). Chemical compatibility between UN and AFA steel needs to be verified before implementation in a nuclear...
MgTeMoO6 ceramic sintered at the ultra-low temperature of 660 °C for 6 h achieved excellent microwave dielectric properties with εr = 11.93, Q × f = 34,453 GHz and τf = – 82 ppm/°C, whereas ZnTeMoO6 had the corresponding performances of εr = 12.39, Q × f = 29,153 GHz...